HPLC Valve and Injector Accessories

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, Binary

MilliporeSigma™ Supelco™ Rheodyne™ Model 7060 Selection Valve

Number of ports: 7 and Number of positions: 6

MilliporeSigma™ Supelco™ Rheodyne™ Stator

MilliporeSigma™ Supelco™ PEEK Inline Microfilter

Install between 2 pieces of capillary tubing, using Microtight tubing sleeves. PEEK housing with special PEEK fitting that encases the 0.5 μm PEEK frit. Through hole 0.006 in., swept volume 0.24 μL. Includes 2 MicroFingertight nuts, and 5 frits (1 installed).

MilliporeSigma™ Supelco™ Rheodyne™ Rotor Seal for Model 7125/7725/7725i Injector

Rotor Seal for Model 7125/7725/7725i Injector is an accessory for use with mainly Rheodyne™ model 7725 and 7725i injectors for operation at pH 0-14.

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, In-line

MilliporeSigma™ Supelco™ Knitted Reactor Coil

For use with PHRED Reactor

MilliporeSigma™ Supelco™ LC column Replacement Bed Supports

For use with flow adapter only.

MilliporeSigma™ Supelco™ Miniature Regulator with Gauge

Reliable pressure regulation to 1 psig (0.07 kg/cm²), indicated on a 0-60 psi (4.2 kg/cm²) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm²).

MilliporeSigma™ Supelco™ Sample Loop for Model 7010/7125 Injector, Stainless Steel

MilliporeSigma™ Supelco™ Valco™ Precision Sampling Plunger Tips

For series A, A-2, C, and D Pressure-Lok Gas syringes. For 25 μL to 250 μL syringes, factory repair only.

MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™ 7725

Manual with MBB, Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ OQ/PV and Installation Kit, API MS

For Mass Spectrometry

MilliporeSigma™ Supelco™ HyperShear Ultra HPLC High Pressure Static Mixer, Binary Tee Housing Assembly, 18,000 psi

HyperShear Mixers incorporate a highly efficient cross-flow shearing mechanism which produces vortex shear mixing over a wide flow range. This mixing technology typically delivers between 25% to 200% better mixing efficiency compared to conventional packed bed or tortuous path mixers.

MilliporeSigma™ Supelco™ Sample Diffusion Discs for LC columns

A 20 μm polyethylene disc sealed to an acrylic ring. Installed on top of column packing in an open-ended column, it protects the packing from disruption.